Rfid Ppi1 Commands; Get Tag Unique Id; Set Tag Type - Printronix T5000e Series Quick Setup Manual
Printronix, inc. owner manual pilot printer t5000e tm series
Hide thumbs
Also See for T5000e Series:
- Module manual (78 pages) ,
- Quick setup manual (40 pages) ,
- User manual (398 pages)
Table of Contents
Advertisement
Chapter 3
RFID PPI1 Commands
RFID PPI1 Commands
Get Tag Unique ID
Purpose
Format
Comments
Set Tag Type
Purpose
Format
Comments
60
Read the unique identification number of the RFID tag
(embedded in the smart label).
^RI x
^RI
Get Tag Unique ID command.
x
The field number to which the data will be
assigned. The default is 0, and other
acceptable values range from 1 to 9999.
The PPI1 only supports Alien Technology Class 1a
tags, which do not have the unique identification
numbers. Therefore, the PPI1 absorbs this command.
Select the type of the RFID tag (embedded in the smart
label).
^RS x
^RS
Set Tag Type command.
x
Number assigned to the type of the tag.
The default is 0, and other acceptable
values range from 1 to 9999.
The PPI1 only supports Alien Technology Class 1a
tags. There are no alternative choices. Therefore, the
PPI1 absorbs this command.
Advertisement
Table of Contents
