Cleaning Interval; Ribbon Specifications; Paper Specifications - Printronix P4280-CT Setup Manual

Cleaning Interval

Every 6 months or 1000 hours of operation, whichever occurs first. Cleaning
instructions are in the Operator's Guide.

Ribbon Specifications

NOTE: Use only the Printronix ribbons listed below. Each kit contains six
Extended Life Text Ribbon Kit
Bar Code Ribbon Kit

Paper Specifications

NOTE: The following are general paper specifications. Test paper stocks
Paper
Type
Thickness
Form Thickness
Drive
Slew Rate
Labels
On Backing
A–2
ribbons.
with your applications before ordering large quantities.
Edge–perforated, fanfold, 3 to 16 inches wide
(7.62 to 40.64 cm)
Single–part: 15 to 100 pound stock
(6.80 to 45.36 kg)
Multi–part: 1– to 6–part forms
0.025 inches maximum (0.635 mm)
Adjustable tractors (6–pin engagement)
15.8 inches/second maximum (40.1 cm/sec) for the
first 3.3 inches/second (8.38 cm/sec), then
8 inches/second (20.32 cm/sec) thereafter.
(Intentionally slowed to improve paper stacking.)
One–part continuous perforated fanfold back form.
Labels must be placed at least 1/6 inch from the
P/N 107675–001
P/N 107675–005
Printer Specifications