Restoring Nvram - Printronix P4280-CT Setup Manual

Restoring NVRAM

The RESTORE NVRAM option reloads one of four sets of parameters stored
in NVRAM. When restoring the setup, the host performs an internal block
check for the selected setup number. If the verification fails, the setup is not
restored. The message display shows:
If this occurs, try restoring from one of the other NVRAM setup areas. When
the restoration is completed, the message display shows:
1. Press the
2. Press ENABLE / HOLD to return the printer to the enable mode.
NOTE: Device ID and Device Address will not take effect until the power is
3–30
RESTORE NVRAM
SETUP # x IS BAD
SETUP # x
LOADED
switch to exit to Level I of the menu.
cycled.
Configuring the Printer