Table of Contents
Advertisement
Configuring the RibbonMinder
This section explains how to enter the program mode and select
RibbonMinder parameters. Each parameter is explained in the following
pages. Refer to the RibbonMinder Configuration Menu on page 5–4.
All RibbonMinder parameters are saved in Non–Volatile Random Access
Memory (NVRAM).
1. Press ENABLE / HOLD to set the printer in the hold mode.
2. Press FUNC + PGM to unlock the program mode.
3. Press PGM.
4. Press the
5. Press the
6. Press the
7. Press the
8. Press the
Option
NEW RIBBON
ENABLE / DISABLE
RIBBON SIZE
ANALYZE JOB
SET JOB RATE
WHEN WORN ACTION
9. Go to the appropriate page to continue configuring.
10. After you finish configuring, press the
program mode.
11. Press FUNC + CANCL to lock the program mode.
12. Press ENABLE / HOLD to set the printer in the enable mode.
RibbonMinder
switch until PRINTER PARAMS displays.
switch.
or
switch until RIBBON MINDER displays.
switch.
or
switch to select one of the following options:
Page
5–5
5–6
5–7
5–8
5–10
5–12
switch until you are out of the
5–3
Advertisement
Table of Contents
