Table of Contents
Advertisement
The xxx field displays the new MPP. MPP value ranges from 1 to the
Physical Maximum Print Position (PMPP).
NOTE: If the line length (MPP) is longer than the maximum line length
4. After entering the new MPP value, press ENTER. If the value you
selected is valid, the message display shows:
An invalid value produces this display:
If this message displays, use the number switches to enter the new value for
MPP.
5. Press FUNC + CANCL to exit from the Line Length selection level.
6. Press the
7. Press ENABLE / HOLD to return the printer to the enable mode.
Configuring the Printer
(PMPP) for that pitch, the MPP value reverts to the PMPP value.
Refer to Table 3–2, which displays the valid values of the PMPP.
NEW MPP
xxx
SELECTED
ILLEGAL
NEW MPP
xxx
switch to exit to Level I of the menu.
3–17
Advertisement
Table of Contents
