Table of Contents
Advertisement
IMPORTANT:
For correct video playing you may need to play them by the free VLC player (http://www.videolan.org/vlc/).
Also, you can use a player fro, the camera web interface in the Setting – Playback – Client PC menu.
Image File name: enter a file name which will correspond to the names of all files sending
to NAS.
IMPORTANT:
When you add the NAS server with "Video" as the type of attached files it is important to control the
volume of available buffer memory. In case of buffer overfilling a notification will be sent.
If you select "System log" as a file type, then setting group looks contains the following
items (Pic. 11.17).
File name: enter a file name which will correspond to the names of all system log files sent
to NAS.
NOTE:
To save changes press the [Save] button, the FTP server window will be closed. If you do not want to save
any changes press the [Cancel] button.
IMPORTANT:
Recording files to the FTP server may cause the decreasing of frame rate when low bitrate data channels
are used.
11.1.2. SD card
To configure memory card recording go to SETTING – Event – Event Server – SD Card.
This menu contains the following sections: "SD card" and "Settings". When a memory card is
used for the first time, the [Settings] section is not available.
After installing a memory card you should format it. To do so you need at first to turn it off
(Pic. 11.18).
N300 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.17
77
Advertisement
Table of Contents
