Ending A Call; Activating Or Deactivating The Keypad Lock; After Leaving The Radio Network - Siemens HiPath 4000 Operating Instructions Manual

Conducting calls – the basic functions
Step by Step
50

Ending a call

a or
k
Press the On-hook key briefly or place the handset in
the charging shell.
The call charges are displayed, depending on the
communication system.
Activating or deactivating the keypad
lock
This feature protects against accidentally pressing but-
tons when the handset is in a pocket, for example. The
keypad lock turns off automatically when a call comes
in and turns back on when the call has ended.
# Press the hash key until the activation or deactivation is
confirmed by a crescendo tone sequence.
A key icon on the display indicates that the keypad lock
is active.

After leaving the radio network

The message "No base" flashes on the display. The
handset repeatedly attempts to synchronise with a
base. The intervals between synchronisation attempts
increase on account of the integrated power saving
function.
You can switch off your handset to save the battery.