Registering Bluetooth Devices - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
u v
ò
Bluetooth
s t
Search Data Device
s t
Trust Device
s t
agreed PIN:
s t
Repeat Search

Registering Bluetooth devices

The distance between the handset in Bluetooth mode
and the activated Bluetooth device (headset or data
device) should be no more than 10 m.
To connect a Bluetooth headset, see
If the Bluetooth connection is not yet established
between the handsets, perform the following steps:
Searching on your handset
v Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm. The handset search-
es for Bluetooth-enabled devices. This may take a few
minutes. If devices are found, these will be shown in a
list.
s t Select the required device, for example, the other
handset.
Trusting the device
Press the display key.
Options
[
Select the menu item and confirm.
[
Enter the Bluetooth PIN and confirm (default: 0000).
The device is saved in the list of known devices.
Cancelling/repeating current search
Press the display key to cancel the search.
Cancel
or
Press the display key.
Options
[
Select and confirm the menu item in order to repeat the
search.
Additional functions
Page 52.
109