Setting The Date And Time - Siemens HiPath 4000 Operating Instructions Manual

Setting the handset
Step by Step
u v
Ï
Settings
s t
Date/Time
32

Setting the date and time

The date and time setting can be used to ensure that
the date and time are assigned correctly to incoming
calls and in order to use the alarm.
The handset date and time are automatically set when
you set up a call to another station. If your communica-
tion system does not support this function, you can set
the date and time manually.
Either:
v Open the handset's main menu.
[
Select the menu icon and confirm.
[
Select the menu item and confirm.
or: If the date and time have not yet been set:
Press the display key.
Time
then:
o
Enter the date, for example 22.09.2007 = 22092007 .
s Move the cursor down one line.
o
Enter the time, for example 19:05 = 1905.
Save the settings.
Save
Caution:
If your communication system does not auto-
matically set the date and time, you must check
the setting from time to time and if necessary,
correct it.