Siemens HiPath 4000 Operating Instructions Manual page 120

Error
The following, for
example, appears:
Base 1
Outgoing and incom-
ing calls and activation/
deactivation are not
possible.
The following appears: Maximum input time
The following appears: The communication
The following appears:
Currently not
accessible
The following appears:
Not possible
Or:
Incorrect input
Or:
Nothing stored
The following appears:
Not authorized
The following appears:
PIN Incorrect
The following appears:
Not available
The following appears:
Do not disturb
Possible cause
The handset is locked. Remove the batteries
was exceeded.
The On-hook key was
not pressed.
system is overloaded.
Function is currently
not available.
No connection under
the phone number
dialled available.
Speed-dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled (for
example, if there is no
second partner for
toggling), number
dialled was incomplete.
Blocked function was
called.
Incorrect PIN was
entered.
Phone number was not
fully entered, the star or
hash key was not
pressed.
Data transfer is active. Wait and try again later.
Appendix
Remedy
from the handset and
then re-insert them.
Proceed as when loading
batteries for first time
Page 17.
Avoid long pauses
between keystrokes.
Press the On-hook key.
Wait and try again later.
Wait and try again later.
Enter the phone number
correctly or call the
attendant console.
Correct your input,
select a permitted
option, enter the phone
number in full.
Apply to the relevant
service personnel for the
COS for the blocked
function.
Enter the correct PIN.
Enter the phone number
correctly or as
prescribed.
120