Siemens HiPath 4000 Operating Instructions Manual page 82

Conducting calls – enhanced functions
Step by Step
TO WAIT. CALL
82
Parking and resuming a call
You can park a call to your handset in a free parking po-
sition and resume it at your own telephone or another
one. This function can also be performed at telephones
which do not have a display.
p
You are conducting a call.
o
Enter the system parking code (consult System Support
if you need help).
1 ... 9 Enter and note a parking position number between
1 and 9.
The call is parked.
a Press the On-hook key.
Resuming a parked call
c or d The handset is not in the charging shell. Press the Talk
key or Speakerphone key.
o
Enter the system parking code (consult System Support
if you need assistance).
1 ... 9 Enter the parking position number between 1 and 9 that
you have noted and continue your call.
Parking is not possible
If all parking positions or the selected one are busy, or if
call parking is not available for some other reason, you
will receive both an acoustic and a visual message.
If the selected parking position is occupied, you will re-
ceive a display message and hear the busy tone.
Either:
[
Confirm and continue the call.
or:
a Press the On-hook key. You receive a recall from the call
on hold.