Siemens HiPath 4000 Operating Instructions Manual page 73

Step by Step
> <
BASIC SERVICE
> <
DESTINATIONS
FORWARD
FWD-VAR-ALL-
BOTH
> <
NEXT
FWD-FIXED off
> <
NEXT
FWD-VAR-ALL-INT
Variable forwarding
For variable forwarding you can choose between six
different call forwarding types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Forwarding after timeout
• Fwd. on busy/after timeout
Rem.: The various forwarding types must be configured
for the user.
The forwarding types are mutually exclusive except for
"forwarding for internal" and "forwarding for external".
You can program a forwarding destination for each of
the two exceptions and activate them both.
Example:
You have activated variable forwarding. If you now pro-
gram and thus activate forwarding after timeout, varia-
ble forwarding will be automatically deactivated and its
forwarding destination will be deleted.
Selecting a variable forwarding type
Select Destinations and Forwarding in the service
menu.
u Open the system menu.
[
Select and confirm the basic service.
[
Select the menu item and confirm.
[
Confirm the option shown.
"Variable forwarding" will be offered first.
Output on first line.
[
Confirm to select the next forwarding type.
Output on first line.
[
Confirm to select the next forwarding type.
Output on first line.
Conducting calls – enhanced functions
73