Inserting The Battery - Siemens HiPath 4000 Operating Instructions Manual

Inserting the battery

The handset is supplied with an approved battery. The battery is not
charged when supplied. It is first charged in the handset.
Caution:
• Please observe the safety notes
• Only use approved batteries
• Open the battery compartment in a dust-free environment only.
• Your phonebook entries and all settings remain stored even if
you remove the battery. The date and time settings will be
reset.
• Only remove the battery if it is defective. The battery's life
diminishes each time it is removed.
1. If installed: Remove the attachment clip
Insert a screwdriver between the attachment clip and the battery cover (1)
and force the attachment clip outward (2) until it dislodges.
1
Likewise dislodge the clip on the opposite side and then remove it.
2
Putting the handset into service
Page 2!
Page 123!
15