Door Phone And Door Lock Release (Figure 6-3); Figure - Samsung DCS-816 Installation Manual

SAMSUNG
DCS-816

6.4 Door Phone and Door Lock Release (Figure 6-3)

The DCS DPIM module is required to install a door phone or a door lock release. The DPIM has a
door phone interface and a door lock release circuit, which can be connected to any DLI port of
DCS-816. The system requires MDF connection for DPIM modules and modular jack connection
for a door phone or a door lock release. DPIM connections can be done through the champ
connector on the base board. See Figure 2-3 and refer to section 2.5 (MDF Cabling).
Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via the
champ connector on the base board and connect a door phone or a door lock release to the
DPIM.
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
LOCK
BLUE
6
TO CUSTOMER-PROVIDED
DOOR LOCK RELEASE
CONNECTING A DOOR PHONE AND LOCK RELEASE
Technical Manuals Online! - http://www.tech-man.com
3 4
DOOR BOX LINE
THREE PAIR
MODULAR CABLE
WHITE
1
CHAMP CONNECTION
PIN COLOUR
39/14 BK-BR/ BR/BK T/R, 1
40/15 BK-S/ S-BK
41/16 Y-BL/ BL-Y
42/17 Y-O/ O-Y
43/18 Y-GR/ GR-Y
44/19 Y-BR/ BR-Y
45/20 Y-S/ S-Y
46/21 VL-BL/BL-VL
47/22 VL-O/ O-VL
48/23 VL-GR/ GR-VL T/R, 10
49/24 VL-BR/ BR-VL T/R, 11
50/25 VL-S/ S-VL
TWO PAIR
MODU LAR CABLE
² CONNECT A DPIM TO ANY DLI PORT AFTER
CONNECTING A DOOR PHONE TO THE DPIM
² NO EQUIPMENT CAN BE INSTALLED
OUTDOORS
² DOOR LOCK RELEASE RATE : 24VDC, 1A MAX
6-4
CIRCUITS / FUNCTIONS
st
DLI port on base
nd
T/R, 2 DLI port on base
rd
T/R, 3 DLI port on base
th
T/R, 4 DLI port on base
th
T/R, 5 DLI port on base
th
T/R, 6 DLI port on base
th
T/R, 7 DLI port on base
th
T/R, 8 DLI port on base
th
T/R, 9 DLI port on base
th
DLI port on base
th
DLI port on base
th
T/R, 12 DLI port on base
RED
4
£Ð£«
5
BLACK
£Ð£-
3
DOOR PHONE
GREEN
£Ì£±
2
YELLOW
£Ì£²

FIGURE 6-3

Installation
March 1999