Door Phone And Door Lock Release (Figure 6-3); Connecting A Door Phone And Lock Release - Samsung DCS 816 Installation Manual

SAMSUNG
DCS-816

6.4 Door Phone and Door Lock Release (Figure 6-3)

The DCS Door Phone Interface Module (DPIM) is required in order to install a door phone or a
door lock release mechanism. The DPIM has a door phone interface and a door lock release cir-
cuit, which can be connected to any DLI port of DCS-816. The system requires MDF connection
for DPIM modules and modular jack connection for a door phone or a door lock release. DPIM
connections can be done through the Champ connector on the base board. See Figure 2-3 and
refer to section 2.5 (MDF Cabling).
Use one pair twisted wires, connect each DPIM module to the DLI port of your choice via the
Champ connector on the base board and connect a door phone or a door lock release to the
DPIM.
25 PAIR CABLE WITH FEMALE CONNECTOR TO THE BASE CHAMP CONNECTOR
LOCK DOOR BOX
THREE PAIR
MODULAR CABLE
BLUE
WHITE
TO CUSTOMER-PROVIDED
DOOR LOCK RELEASE

CONNECTING A DOOR PHONE AND LOCK RELEASE

CHAMP CONNECTION
PIN COLOUR
39/14 BK-BR/ BR/BK T/R, 1
40/15 BK-S/ S-BK
41/16 Y-BL/ BL-Y
42/17 Y-O/ O-Y
43/18 Y-GR/ GR-Y
44/19 Y-BR/ BR-Y
45/20 Y-S/ S-Y
46/21 VL-BL/BL-VL
47/22 VL-O/ O-VL
48/23 VL-GR/ GR-VL T/R, 10
49/24 VL-BR/ BR-VL T/R, 11
50/25 VL-S/ S-VL
TWO PAIR
MODU LAR CABLE
LINE
CONNECT A DPIM TO ANY DLI PORT AFTER
CONNECTING A DOOR PHONE TO THE DPIM
NO EQUIPMENT CAN BE INSTALLED OUTDOORS
DOOR LOCK RELEASE RATE : 24VDC, 1A MAX
CIRCUITS / FUNCTIONS
T/R, 2
T/R, 3
T/R, 4
T/R, 5
T/R, 6
T/R, 7
T/R, 8
T/R, 9
T/R, 12
RED
BLACK
GREEN
YELLOW
6-4
Installation Manual
st
DLI port on base
nd
DLI port on base
rd
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
th
DLI port on base
Ｐ＋
Ｐ－
DOOR PHONE
Ｌ１
Ｌ２
FIGURE 6-3