Configuring The Play Mode - GeoVision GV-IP Decoder Box User Manual

Hide thumbs Also See for GV-IP Decoder Box:

Table of Contents

3.3 Configuring the Play Mode

You can configure the play mode for the live view display. On the main menu, select

press OK. This window appears.

CAM Loop Time Interval: Enter the time interval (in seconds) between each looped

channel. The valid range is from 10 to 600. The default is 30 seconds.

CAM Login ID: Enter the ID of the camera. The default is admin. The maximum

number of characters is 15.

CAM Login Password: Enter the password of the camera. The default is admin. The

maximum number of characters is 15.

NVR Port: Keep the NVR port in default (10000). Modify it only when necessary.

Note: The channels added directly with GV-IP Decoder Box for display must also have the

same ID and password established here.

Figure 3-4

and

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the GV-IP Decoder Box and is the answer not in the manual?

Gv-ip Gv-pad