GeoVision GV-IP Decoder Box User Manual page 22

2. To select channels, press the up and down arrow keys (No.4, Figure 1-4) and press the
right arrow key. The yellow shows the cursor position and the selected channels will be in
red.
3. Press the OK key. The selected channels will be displayed.
Note:
1. When the system idles over 30 seconds or resumes after power interruption, the GV-IP
Decoder Box will automatically display channels based on the last successful settings.
2. Every time when the search function
previously on the Device List will be unselected.
16
Figure 2-11
is performed, any channels selected