GeoVision GV-IP User Manual
  1. Manuals
  2. Brands
  3. GeoVision Manuals
  4. Speakers
  5. GV-IP
  6. User manual
GeoVision GV-IP User Manual

GeoVision GV-IP User Manual

Hide thumbs Also See for GV-IP:
Table of Contents

Advertisement

Quick Links

Download this manual
GV-IP Speaker User's Guide
This document describes how to add and control GV-IP Speaker with GV-Control Center and
GV-VMS. And how to locate the speaker and update its firmware using GV-IP Speaker Setting
Kits.
1. Compatible Software ...................................................................................................................... 1
2. Adding to GV-Control Center ......................................................................................................... 2
2.1 Searching for a Speaker .......................................................................................................... 2
2.2 Manually Adding a Speaker ..................................................................................................... 3
2.3 Associating a Speaker with a Camera .................................................................................... 4
2.4 Speaker Controls ..................................................................................................................... 5
3. Adding to GV-VMS .......................................................................................................................... 7
3.1 Searching for a Speaker .......................................................................................................... 7
3.2 Manually Adding a Speaker ..................................................................................................... 8
3.2 Associating a Speaker with a Camera .................................................................................... 9
3.3 Speaker Controls ..................................................................................................................... 9
4. GV-IP Speaker Setting Kits ...........................................................................................................11
4.1 Changing the IP Address ....................................................................................................... 14
4.2 Updating the Firmware .......................................................................................................... 15

1. Compatible Software

⚫
GV-Control Center V4.2.0 or later
⚫
GV-VMS V17.4.7 / V18.3.2, patch files required
GeoVision Inc.
1
10/12/2023

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GV-IP and is the answer not in the manual?

Questions and answers

Related Manuals for GeoVision GV-IP

Summary of Contents for GeoVision GV-IP

  • Page 1: Table Of Contents

    GV-IP Speaker User’s Guide This document describes how to add and control GV-IP Speaker with GV-Control Center and GV-VMS. And how to locate the speaker and update its firmware using GV-IP Speaker Setting Kits. 1. Compatible Software ........................1 2. Adding to GV-Control Center ......................2 2.1 Searching for a Speaker ......................

  • Page 2: Adding To Gv-Control Center

    Click Add Selected Hosts. The speaker is added to the Host List. Note: To change the default ID and Password, you need to install the GV-IP Speaker Setting Kits, and access Setting > ONVIFParam. See 4. GV-IP Speaker Setting Kits.

  • Page 3: Manually Adding A Speaker

    Note: The speaker, by default, has a DHCP-enabled IP address, and no fixed IP address. See 3. GV-IP Speaker Setting Kits for discovering its IP address. On the Host List, click the Add button > Add Host > Add IP Speaker.

  • Page 4: Associating A Speaker With A Camera

    1. If you want to associate a camera with another speaker, remove the camera’s image from the Live View window before enabling another speaker with the IP Speaker Setting. 2. You can associate a speaker with multiple cameras. GeoVision Inc. 10/12/2023...

  • Page 5: Speaker Controls

    Right-click the speaker icon, select Play Wave File and locate a .WAV file to play. When the “Want to Repeat Wave File?” message appears, click Yes to play the WAV file continuously. To stop playing, double-click the speaker icon. GeoVision Inc. 10/12/2023...
  • Page 6 100% (fully opaque). ◼ Always on top: Always display the window on top of the screen. Broadcast Start / stop audio broadcasting. Play File After selecting an audio file, click the button to start/stop playing. GeoVision Inc. 10/12/2023...

  • Page 7: Adding To Gv-Vms

    Click Add selected devices. The speaker is added to the Content List. Note: To change the default ID and Password, you need to install the GV-IP Speaker Setting Kits, and access Setting > ONVIFParam. See 4. GV-IP Speaker Setting Kits.

  • Page 8: Manually Adding A Speaker

    Note: The speaker, by default, has a DHCP-enabled IP address, and no fixed IP address. See 3. GV-IP Speaker Setting Kits for discovering its IP address. Under the IP Speaker of the Content List, click the Add button > Add IP Speaker.

  • Page 9: Associating A Speaker With A Camera

    Press and hold the icon. The icon turns green . The operator can then broadcast audio through a selected group of speakers. Speaker Press and hold the icon. The icon turns blue . The operator can then broadcast audio through a selected speaker. GeoVision Inc. 10/12/2023...
  • Page 10 Plays a selected WAV file. To stop playing, double-click the speaker Play WAV File icon. Volume Setting Changes the volume of the speaker. Configure Changes the connection settings of the speaker. Delete Removes the speaker from the Content List. GeoVision Inc. 10/12/2023...

  • Page 11: Gv-Ip Speaker Setting Kits

    If you already know the IP address of the speaker, type its IP address in the left field and click Query to to find it in the network. Query Find the IP address of the speaker, under the same LAN as the GV-IP Speaker Setting Kits and GV-Control Center. GeoVision Inc.
  • Page 12 By default, the Use ID is admin and the Password is admin123. You can change both ID and Password. [SipParam] Connect a GV-IP Speaker to the SIP server. Use the SIP server to call the speaker and speak into the microphone installed on the SIP server in order to broadcast via the speaker.
  • Page 13 Enable this option to use the broadcasting method to set up a speaker when the speaker and the computer used for configure it are on different network segments. Machine ID. Enable BCastSend and MachID for speaker configurations when two speakers have the same IP address. GeoVision Inc. 10/12/2023...

  • Page 14: Changing The Ip Address

    Run GV-IPS Setting. Click Query to detect speakers on the same LAN. Select a speaker in the list. Click Setting. You are prompted to enter the ID and password of the speaker. Change the speaker’s IP settings. Click OK. GeoVision Inc. 10/12/2023...

  • Page 15: Updating The Firmware

    Run GV-IPS Setting. Click Query to detect speakers on the same LAN. Select a speaker in the list. To specify the IP address of the PC used to upgrade firmware, click type the IP in the Update IP field. GeoVision Inc. 10/12/2023...
  • Page 16 Note: If the speaker disappears from the list after you click Update. Wait a minute and then click Query to detect it again. Run GV-IP Speaker Update Kits. A、 Click Open File to locate a firmware file. B、 Click Start to search for speakers in BOOT mode.
  • Page 17 C、 Select a speaker in the list D、 Click Start to start firmware upgrade. On the GV-IP Speaker Update Kits user interface: ⚫ filterUnmatchedType: When the option is enabled, only search for speakers with the same firmware versions. ⚫ markHighVer: When the option is enabled, it will detect new firmware version available, and display the message “Higher version”.

Table of Contents