Displaying Channels From Gv Ip Devices - GeoVision GV-IP Decoder Box User Manual

2.4 Displaying Channels from GV IP Devices

Use the search feature
installed under the same LAN.
Before you start:
This method only applies to GeoVision IP devices under the same LAN with GV-IP
Decoder Box.
The NVR port (of GV-IP Decoder Box) and VSS port (of GV IP Devices) must be the
same.
The ID and password set on GV IP devices and GV-IP Decoder Box (step 4 in 2.3
Configuring the IP Address, ID and Password) must be the same.
Note:
1. To add third-party IP channels, see 2.5 Displaying Channels Using GV IP Device Utility.
2. To add channels connected to GV-System, see 2.6 Displaying Channels from
GV-System.
1. Select the icon and press OK. The GV IP devices under the same LAN with the
GV-IP Decoder Box will appear on the Device List
on GV-IP Decoder Box to display channels from GV IP devices
Figure 2-10
Getting Started
2
15