[Modify Velocity] - Yamaha EX5 Owner's Manual

4. Modify Velocity
This job alters the velocity of the notes in the specified
range. The velocity refers to the strength at which a
key is pressed. You can change the velocity using two
types of parameters: the Rate and Offset.
The volume may differ depending on the selected voice
that has a different velocity settings in the Voice Edit
mode.
The modified velocity value will be obtained based on
the formula below.
Modified velocity = original velocity value x Rate +
Offset value
The velocity value doesn't exceed the upper and lower
limits,1 and 127.
Track
Sets the track where Modify Velocity will be
executed.
Settings: 1~16 (Sequence tracks 1~16)
Measure
Sets the measure range (beginning measure to the
end measure) where Modify Velocity is executed.
Settings: 001~999 (for the beginning measure and the
end measure)
Rate
Increases or decreases the velocity of all notes in the
designated range by multiplying the Rate value. A
setting of 100% produces no change. A setting less
than 100% will decrease the velocity, whereas a
setting above 100% increase it.
Original Data
(Vel)
96 64 32
Velocity rate=50%
(Vel)
48 32 16
Velocity rate=150%
(Vel)
127 96 48
Settings: 000%~100%~200%
Offset
Increases or decreases the velocity of all notes in the
designated range by adding the Offset value. A
setting of 0 produces no change. Negative values
decrease the velocity, while positive values increase
it.
Original Data
(Vel)
96 64 32
Velocity offset=–20
(Vel)
76 44 12
Velocity offset=+20
(Vel)
116 84 52
Settings: –99~+00~+99
216
127 96
63 48
127 127
127 96
107 76
127 116