Azalea Base Seat Attachment - Invacare Azalea Assist Service Manual

Azalea®
3.
a. Mount the sliding seat D on the seat plate B.
Attach the stop block F.
b.
Attach the front screws and nuts E.
c.
Tighten the screws and nuts E.
d.
4.
Press the release handle C and push the sliding seat D forwards.
5.
Attach and tighten the rear screws and nuts G.
6.
A
a. Re-mount the seat plate and the sliding seat on the seat
frame.
b. Re-mount and tighten the screws and nuts for the seat plate
A.
8

2.8 Azalea Base seat attachment

Seat plate
B
C
A
The seat plate can either be used as a base for a seat cushion
or for attaching seat shells and other seating modules.
• The seat plate C can either be used as a base for a seat cushion
or for attaching seat shells and other seating modules.
• When delivered, the seat base is fixated with two screws A.
•
If a seat shell is to be attached, the seat plate needs to be fixated
with four additional screws B. These are delivered with the
wheelchair.
The seat plate is adjustable in depth.
Seat plate with wedge
The seat plate with wedges is an option that gives the
possibility of 5° extra tilt either in front or in the back.
CAUTION!
Risk of damage
The one-piece moulded seat attachments might break.
– The back should not be reclined when the Azalea Base
is equipped with one-piece moulded seat attachments.
H-bracket
B
A
A
H-bracket
B Attachment screws
The H-bracket is used when attaching a quick-release seat
shell to the Azalea Base.
The H-bracket is adjustable in depth.
1580313-B