Prime Quantity - Accu-Chek Spirit User Manual

8.5.4 Prime quantity

The prime quantity necessary to completely fill an infusion set depends
on the length of the infusion set tubing. The shorter your infusion set
tubing, the less insulin will be required to prime the infusion set. The
default setting for the prime quantity is 25 h units of insulin.
Note The amount of insulin used for the priming is not added to
the history of daily insulin totals.
You can press any of your insulin pump's keys to stop
priming.
Make sure the SETUP MENU ADVANCED is
turned on.
Press d to move to the SETUP MENU
ADVANCED.
Select with f.
Press d to move to the PRIME QUANTITY
screen.
Press a or s to select the desired prime
quantity.
Save and exit with f.
ADVANCED user menu
137