Cancel A Multiwave Bolus - Accu-Chek Spirit User Manual

Note Once the immediate bolus is delivered, the remaining time,
bolus amount and the current hourly basal rate are displayed
in the RUN screen.
If a temporary basal rate is active at the same time, the
remaining time and amount of the bolus and the amount of
the increased or decreased hourly basal rate are displayed in
the RUN screen.

8.2.2 Cancel a MultiWave bolus

– During programming (the bolus amount or bolus duration blinks):
You have three options for cancelling a MultiWave bolus during
programming:
• If you do not press any key for 20 seconds h, your insulin pump
returns to the RUN screen (timeout).
• Exit to the MULTIWAVE BOLUS menu by pressing d + a
simultaneously.
• Set the total bolus amount to 0.0 units and press f.
No bolus is delivered.
– During the start delay (
• Press s or a. Your Accu-Chek Spirit beeps and vibrates.
Your insulin pump returns to the RUN screen.
An alert A8: BOLUS CANCELLED occurs. Press f twice to
confirm and turn off the alert.
See the section 10.1.8 "Alert A8: BOLUS CANCELLED" for further
information.
No bolus is delivered.
– During bolus delivery:
• The immediate delivery can be cancelled by pressing and holding
s or a for 3 seconds until you hear a melody. This cancels the
whole bolus (immediate and extended bolus delivery). An alert
A8: BOLUS CANCELLED occurs.
blinks):
ADVANCED user menu
129