Table of Contents
Advertisement
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a clockwise direction.
To decrease the load, turn the tension control knob in a counterclockwise direction.
Adjusting the Seat Height
Turn the seat height adjustment knob in a counterclockwise direction until the seat post
can be slid up or down and then slide the seat post up or down direction to the suitable
position. Lock the seat post in place by tightening the seat height adjustment knob in a
clockwise direction.
NOTE: When adjusting the height of seat post, make sure the plastic bushing does
not exceed the mark line on the seat post.
STORAGE
62
For your convenience, the bike can be folded up and placed in a storage area.
1.
Remove the Safety Pin A (22) and the Safety Pin B (62) from the bike.
2.
Push the Rear and Front Frames (1, 2) together until they meet.
3.
Push the Front Frame Support Tube (16) into the Front Frame Support Tube Holder
(98).
4.
Align pin holes for inserting the Safety Pin A (22) then insert the removed Safety Pin A
(22) into the holes on the Rear and Front Frames (1, 2) to lock the frames in place.
5.
Push the Computer Post (17) downwards and align pin holes for inserting the Safety
Pin B (62) then insert the removed Safety Pin B (62) into the holes on the Computer
Post (17) and Front Frame (2) to lock the Computer Post (17) in place.
62
17
2
15
1
Hide quick links:
Advertisement
Table of Contents
