Exerpeutic 1110 Owner's Manual page 13

Step 3
Align bolt holes on underside of Seat Cushion (6) with holes on top of Seat Post (5), then
attach with three Ø8.2 Flat Washers (33) and three M8x15 Hexagon Socket Bolts (58).
Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
Connect the Connection Wires B (92) from the Seat Post (5) to the Connection Wires C
(93) from the Front Frame (2).
Insert the Seat Post (5) into Seat Post Plastic Bushing (12). Adjust seat position and insert
the M16 Seat Height Adjustment Knob (14). Turn the M16 Seat Height Adjustment Knob
(14) in a clockwise direction to tighten.
Hardware:
(33) Flat Washer Ø8.2
3 PCS
6
93
5
92
92
2
93
14
12
33
58
Tool:
Wrench 13-15
Allen Wrench with Phillips Screwdriver
(58) Hexagon Socket Bolt M8x15
3 PCS