Exerpeutic 1110 Owner's Manual page 14

80
77
92
31
91
34
32
78
5
92
81
82
91
30
83
Tool:
Wrench 13-15
Allen Wrench with Phillips Screwdriver
Step 4
Remove four M8x45L Hexagon Socket Bolts (31) and four Ø8.2 Spring Washers (80) from
the Back Cushion (77). Then attach the Back Cushion (77) onto the Back Cushion Frame
(78) with four M8x45L Hexagon Socket Bolts (31) and four Ø8.2 Spring Washers (80) that
were removed. Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
Remove two Ø8.2xØ25x1.5t Flat Washers (32), two M8 Nylon Nuts (34), and two M8x50L
Carriage Bolts (81) from the Back Cushion Frame (78). Then attach the Back Cushion
Frame (78) onto the Seat Post (5) with two Ø8.2xØ25x1.5t Flat Washers (32), two M8
Nylon Nuts (34), and two M8x50L Carriage Bolts (81) that were removed. Tighten bolts
and nuts with the Allen Wrench with Phillips Screwdriver and Wrench provided.
Remove two Ø8.2xØ22.2 Curve Washers (30) and two M8x40L Hexagon Socket Bolts (83)
from the Handlebar (82). Then attach the Handlebar (82) onto the Back Cushion Frame
(78) with two Ø8.2xØ22.2 Curve Washers (30) and two M8x40L Hexagon Socket Bolts (83)
that were removed. Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
Connect the Hand Pulse Wire (91) from the Handlebar (82) to the Connection Wire B (92)
from the Seat Post (5).
13