Getting Started; Basic Workflow - Barco ClickShare Installation Manual

3. GETTING STARTED

3.1 Basic Workflow
Before using ClickShare
1. Unpack the ClickShare components and accessories from the box.
For a detailed overview of the content of the ClickShare box, see "About the ClickShare product", page 5.
2. Install the Base Unit in the meeting room using one of the 3 possible installation methods.
For more information on the installing procedures, see "ClickShare installation", page 15.
3. Connect the Base Unit to the mains power and start up.
For more information, see "Power connection and switching on", page 23.
4. Connect the video signal(s) between the Base Unit and the display(s).
For more information on connecting the Base Unit, see "Video signal connections to the Base Unit", page 21.
5. Connect the audio from the Base Unit to the meeting room's sound system.
For more information, see "Audio connection", page 22.
6. If an iPad is allowed to participate, install the ClickShare Link and set up the necessary connections.
For more information, see "Connecting an iPad ", page 24.
7. If configuration via a network is needed, connect a network cable between the Base Unit and the local network.
For more information, see "LAN connection", page 23.
8. If desired, configure ClickShare via the Web Interface.
For more information on the different ways to configure ClickShare, see "Accessing the ClickShare Web Interface", page 29.
ClickShare s ready to be used.
For more information on using ClickShare, refer to the ClickShare User Guide (R5900001). This manual can find it on Barco's
website www.barco.com/clickshare
R5900004 CLICKSHARE 28/02/2013
Click on Visit the ClickShare product page and go to tab Downloads..
3. Getting started
13