Audio Connection - Barco ClickShare Installation Manual

4. ClickShare installation
Image 4-7
Display connections
4.7

Audio connection

About audio
The ClickShare Button captures the audio output of the user's laptop and sends it to the Base Unit together with the video signal.
The Base Unit will then mix all audio signals and have an audio signal output via an analog line out on mini jack socket (3.5mm).
It is up to the user to decide whether or not to send the audio signal together with the video signal. The user can decide this by using
the same tools as they would to control the laptop's speakers or a headphone: the audio controls of the operating system (eg for
Windows: Control Panel > Sounds and audio devices) or the physical buttons on the keyboard of their laptop (mute/unmute, lower
volume, higher volume).
There will be synchronization between the audio and video signal.
How to connect
1. Connect an audio cable with mini jack socket (3.5mm) into the audio out of the Base unit.
Image 4-8
2. Connect the other side to the meeting room's sound system.
22
DVI
DisplayPort DisplayPort
R5900004 CLICKSHARE 28/02/2013
DVI