Operation - ESAB ORIGO Mig C280 PRO Instruction Manual

GB
Recommended fuse sizes and minimum cable areas
Mig C280 PRO
Voltage V
Current A
at 100% duty cycle
at 60% duty cycle
at 30% duty cycle
at 30% duty cycle
Fuse slow A
Mig C340 PRO
Voltage V
Current A
at 100% duty cycle
at 60% duty cycle
at 30% duty cycle
at 30% duty cycle
Fuse slow A
NOTE: The mains cable areas and fuse sizes as shown above are in accordance with Swedish
regulations. They may not be applicable in other countries: make sure that the cable area and fuse
sizes comply with the relevant national regulations.
5

OPERATION

General safety regulations for handling the equipment can be found on
page 4. Read through before you start using the equipment!
WARNING
Rotating parts can cause injury, take great care.
WARNING
To prevent the reel from sliding off the hub: Lock the
reel in place by turning the red knob as shown on the
warning label attached next to the hub.
WARNING
Secure the equipment - particularly if the
ground is uneven or sloping.
bc23de
3∼50 Hz 3∼50 Hz 3∼50/60 Hz
230 380 400-415
13 7
8
18 11 10
32 19 18
4 x 2.5 4 x 1.5 4 x 1.5
20 16 16
3~50 Hz 3∼50 Hz 3~50/60 Hz
230 380 400-415
16 9
10
24 15 14
37 20 21
4 x 4 4 x 2.5 4 x 2.5
20 16 16
- 11 -
3∼50 Hz 3∼60 Hz 3∼60 Hz
500 230 440-460
5 11 7
8 18 10
15 32 17
4 x 1.5 4 x 2.5 4 x 1.5
16 20 16
3~50 Hz 3~60 Hz 3~60 Hz
500 230 440-460
7 16 8
11 23 12
17 36 19
4 x 2.5 4 x 4 4 x 2.5
16 20 16
© ESAB AB 2011