ESAB ORIGO Mig C280 PRO Instruction Manual page 28

Mig C280 PRO, Mig C340 PRO
(W. F. Mechanism 0459 000 884 & 0459 000 883)
Item Denomination
A Feed / Pressure roller
B Gear adapter
C Drive gear
D Inlet nozzle
E Intermediate nozzle
F Outlet nozzle
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires MUST be
used. It is recommended to use 3m long welding gun for aluminium wires, equipped with appropriate
wear parts.
bc23wc
Ordering no. Notes
0459 052 002 Ø 0.8-1.0 mm Fe, Ss & cored wire; V-groove
0459 052 003 Ø 1.0-1.2mm Fe, Ss & cored wire; V-groove
0458 825 001 V-groove, knurled.
0458 825 002 Ø 1.2-1.4mm V-groove, knurled.
0458 824 001 Ø 0.8-1.0mm Al wire, U-groove.
0458 824 002 Ø 1.0-1.2mm Al wire, U-groove.
0458 824 003 Ø 1.2-1.6mm Al wire, U-groove.
0455 053 880
0455 052 001
0455 049 001 Ø 3.0mm plastic for 0.6-1.6mm Fe, Ss, AL, cored wire.
0332 318 001 Ø 2.4mm steel.
0455 072 002
0456 615 001 Al wire.
0469 837 880 Ø 2.0mm steel for 0.6-1.6mm wire.
0469 837 881 Ø 2.0mm plastic for 0.8-1.6mm Al wire.
- 28 -
© ESAB AB 2011