Connection And Control Devices; Overheating Protection; Inductance Connection - ESAB ORIGO Mig C280 PRO Instruction Manual

GB
5.1

Connection and control devices

1 Mains supply switch
2 Switch, coarse control
3 Switch, precise control
4 Indicating lamp, power supply ON
5 Orange indicator lamp, overheating
6 EURO - connector (for welding gun)
7 Connection for return cable (-), high
inductance
5.2

Overheating protection

A thermal overload cutout protects against overheating. The cutout resets automatically
when the unit has cooled.
5.3

Inductance connection

Higher inductance produces a more flowing weld and fewer spatters. Lower inductance
produces a harsher sound and a stable, concentrated arc.
bc23de
8 Connection for return cable (-), low
inductance
9 Knob for selecting - creep start - ON/OFF
10 Knob for wire speed setting
11 Knob for selecting 2/4-stroke control mode
12 Knob for burn-back time setting
13 Digital instrument - V / A
14 Knob for spot welding - ON/OFF and time
setting
- 12 -
© ESAB AB 2011