Disarming - Vision 1480 Series Owner's Manual

Digi-link factory keyless upgrade security
Table of Contents

Advertisement

DISARMING

NORMAL DISARMING
UNLOCK by your factory keyless remote or by
SmartKey door handle touch. Vehicle hazard
will chirp 3 times
and the Status LED will turn off. The 1480 is now
Disarmed and you may enter the vehicle.
If the siren chirps 4 times when you Disarm, it means something had trig-
gered while you were away from the vehicle. In this case, the Status LED
NOTE
Some vehicles equipped with remote engine starters do not allow you to
Unlock while the engine is running. In such a case, you will not be able
to Disarm the 1480 until you shut off the engine.
DISARMING DURING THE SIREN BLAST
If the siren is triggered by the opening of a door or the back hatch,
you should close any open doors or the back hatch before you press
Unlock on your factory remote to disarm. The reason is because some cars
require doors to be closed before you can Unlock with the factory keyless
remote.
Also, if the siren is blasting and the doors are already unlocked, you may
not be able to Disarm the 1480 with a simple press of Unlock. In such a
case, you will need to
This is also true in cases where the car's factory remote only has a single
Lock/Unlock button—you'll have to push the button twice.
© 2 0 1 1 - 2 0 1 4 K I R A M E K , I N C .
arming & disarming
and then press Unlock to Disarm.
UNLOCK
4

Advertisement

Table of Contents
loading

Table of Contents