Vision 1480 Series Owner's Manual page 31

Wire Tie
CONNECTING THE OBD PLUG
On TOYOTA, LEXUS and NISSAN
cars, connecting is as simple as shown
at right. Simply attach to the vehi-
cle's OBD2 connector. After that, you
need only connect the Siren, and then
If you wish to hide the 1480's OBD
plug, you'll need to cut off the OBD
plug and manually connect the 4
wires behind the vehicle's OBD, us-
ing the included PosiTap connectors.
For all cars other than Toyota,
Lexus and Nissan, please consult
our separate INSTALL GUIDE
V I S I O N 1 4 8 0 I N S T A L L G U I D E
Wires exiting RIGHT side
Wrap wires
around PCB
to the right
OBD CONNEC TOR
OR
Wires exiting LEFT side
Toyota OBD2
(–) GND CAN-H
Pin4 Pin6
Pin14 Pin16
( + )12v
CAN-L
OBD2 Connector
8