Siren Connections - Vision 1480 Series Owner's Manual

SIREN CONNEC TIONS
( + ) 12v Siren Output
BRN
during a security breach. Do not confuse this wire with the Brown wire of
the CAN harness!
The way to connect the Brown SIREN wire depends on which version of
siren you have. The 1480S comes with a standard 2-wire siren (see Fig-1
below). The 1480B comes with a more advanced 4-wire siren that has an
onboard backup battery (see Fig-2 below).
MAIN
HARNESS
BRN
FIG-1: 1480S Siren Connections
MAIN
HARNESS
BRN
FIG-2: 1480B Siren Connections
NOTE
One PosiLock connector is included for connecting the 1480's Brown
Siren Output. If you use the included OBD for Power & CAN, you will
have 4 PosiTap connectors left over. Although you can use one or two of
these to easily connect the other siren wires shown above, we suggest a
direct connection to the car's battery. And although it's easy to connect
(–) Ground to a bolt in the siren's metal mount, keep in mind that rust
could result in a faulty Ground in the future.
11 11
STANDARD
SIREN
BLUE
LOOP
Dark Red
PosiLock
RED
BLUE
LOOP
Dark Red
PosiLock
BRN
Cut Blue Loop for 6-tone sound.
Cut Blue Loop for 6-tone sound.
© 2 0 1 1 - 2 0 1 4 K I R A M E K , I N C .
ORG