Disarming - Vision TR537S User Manual

For 1480 & 1460 series security systems
Table of Contents

Advertisement

DISARMING

NORMAL DISARMING
This is the typical way to Disarm, with confirma-
tion chirps ON. Press Button-I on the Pager while
Armed. Doors will then unlock and hazards will flash
3 times (if supported). The siren will chirp 3 times.
The Pager remote will beep 2 times (or vibrate twice), and icons will up-
date (see Fig-3 below). You may now enter the vehicle.
NOTE: If you Arm with the factory remote's Lock button and then you Dis-
arm with the pager, the doors will not Unlock on most cars. In this case,
simply Unlock by the factory remote, or Arm & Disarm with the pager.
NO-CHIRP DISARMING
This method is identical to "Normal Disarming"
except there are no siren chirps emitted when
you Disarm. Press Pager Button-II or Button-III
then release. The doors will then unlock and haz-
ard lights will flash 3 times (if supported). The Pager
Remote will beep 2 times (or vibrate twice, if Vibe Mode is selected), and
icons will update as shown in Fig-4 above. The system is now Disarmed,
and you may enter the vehicle without triggering the siren.
HIGH SECURITY DISARMING
When the system is "triggering" (warning chirps,
siren blast, hazard flash), two button presses are
required to Disarm. This feature allows you to stop
the trigger condition with only 1 press while keeping
the system Armed. You can press Button I or II or III.
(Continues on the next page.)
V I S I O N R F P A G I N G S Y S T E M U S E R ' S G U I D E
NOTE: To Disarm without a remote, see pg.5 in the 1480/1460 Owner's Guide.
System Operation
Push Button
or
II
III
Push Button
or
or
I
II
III
continues...
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr835s

Table of Contents