Main Features; Trunk Release Bypass; Door Trigger; 2-Stage Shock Sensor - Vision 1480 Series Owner's Manual

Digi-link factory keyless upgrade security
Table of Contents

Advertisement

TRUNK RELEASE BYPASS

For cars that support it, pressing the Trunk
Release button on the factory remote will
bypass the shock sensor and trunk triggers
while the trunk opens. Door and Ignition switch
triggers remain active, and doors remain locked.
Five (5) seconds after you close the trunk, the
shock sensor and trunk triggers will be automatically re-activated.
NOTE
Some cars don't support the automatic trigger bypass feature of the
use your factory Trunk Release feature (otherwise the siren will trigger).
TRUNK TRIGGER
The siren will blast for 30s when the trunk is opened
(without the remote) while the system is Armed. Ve-

DOOR TRIGGER

The siren will blast for 30s when any door is opened
while the system is Armed. Vehicle hazard lights may
See bottom half of page 4 on how to Disarm

2-STAGE SHOCK SENSOR

1st Stage ("Warning Chirps").
Sensor detects a light impact to the vehicle body, the si-
ren will chirp 5 times. Sensors will not trigger the siren
while in Sensor Bypass Mode.
2nd Stage ("Full Trigger").
tects a hard impact to the vehicle body, the siren will
blast for 30s (or until Disarmed with the factory remote).
Sensors will not trigger the siren while in Sensor Bypass
See page 15 for common shock sensor problems and solutions.
V I S I O N 1 4 8 0 O W N E R ' S G U I D E
See bottom half of
Each time the Shock
When the Shock Sensor de-

MAIN FEATURES

TRUNK
5 Chirps
30s Blast
6

Advertisement

Table of Contents
loading

Table of Contents