Status Led - Vision 1480 Series Owner's Manual

MAIN FEATURES

STATUS LED

Armed, acting as a visual theft deterrent. The LED turns off when the
system is Disarmed, unless there was a siren trigger.
TRIGGER MEMORY
Table-1 below, showing you what triggered the siren.
If the siren triggered more than once, the LED will show you what caused
the last 3 triggers. Trigger Memory will displayed repeatedly on the LED
until the Ignition is switched ON or until you Arm again.
TABLE-1
LED Flashes
There are no LED Flashes if the power is cut and then restored.
NOTE
Door triggers. If you want Hood triggers to always report as Hood trig-
will need to purchase an optional Hood Pin Switch and have it installed
see the bottom entry on page 15 for more details about Hood trigger
reporting.
9
slowly about once per second while the system is
rapidly while the full siren blast is going off and
Status LED Trigger Memory
2
3
4
6
7
What Triggered the Siren
Door
Trunk
(or back hatch)
Hood
(see Note below)
Ignition
Sensor
(Full Trigger only)
V I S I O N 1 4 8 0 O W N E R ' S G U I D E
-