Vision 1480 Series Owner's Manual page 33

CAN-L
BRN
CAN-L
BRN
the car's OBD connector, or a different location in the car altogether. For
this reason we have prepared separate Install Guides for cars other than
Toyota, Lexus and Nissan, which provide details on where to connect the
BROWN wire.
DON'T CONFUSE CAN-L WITH THE BROWN SIREN OUTPUT!
CAN-H
BRN/RED
CAN-H
BRN/RED
in the car's OBD connector, or a different location in the car altogether. For
this reason we have prepared separate Install Guides for cars other than
Toyota, Lexus and Nissan, which provide details on where to connect the
BROWN/RED wire.
GRN 1-WIRE CAN (HONDA)
1-WIRE
CAN
GRN
WARNINGS!
1) NEVER use the Green wire when installing in Toyota, Lexus or Nis-
san cars. Those cars use only require CAN-H & CAN-L.
2) NEVER connect all 3 wires in the CAN HARNESS! You either use
CAN-H & CAN-L as a pair, or use the Green wire only.
© 2 0 1 1 - 2 0 1 4 K I R A M E K , I N C .
power & c an connec tions
The BROWN wire is a digital I/O line that must be con-
nected to the car's CAN-LOW line. CAN-L is Pin-14 of
the car's OBD connector on all Toyota, Lexus and Nissan
cars. But on other cars it is either in a different location in
The BROWN/RED wire is a digital I/O line that must be
connected to the car's CAN-HIGH line. CAN-H is Pin-6 of
the car's OBD connector on all Toyota, Lexus and Nissan
cars. But on other cars it is either in a different location
The GREEN wire is a digital I/O line that must be con-
nected to the single CAN line, but only on certain HONDA
cars. Such connections are beyond the scope of this manu-
CAN HARNESS
CAN HARNESS
CAN HARNESS
10