Vision 1480 Series Owner's Manual page 15

Ignition Trigger
3
When set to
IG Protect Mode
when the Ignition (IG) turns ON while Armed, as described on page 7.
When set to
RSCM (Remote Start Compatibility Mode)
pass the Shock Sensor and Ignition triggers when the Ignition turns ON
while Armed, as described on page 7.
Hazard Flash During Remote Start
4
When set to
ON
turned on by a remote start system. (This feature only works if program
the Ignition Trigger to
Door Ajar Hazard Flash
7
When set to
ON
is opened or left open while the Ignition is turned ON. Flashing will im-
mediately stop when the door is closed or the Ignition switched OFF.
NOTE
Auto Arm
8
This feature automatically Arms the system when you do the following:
(1) turn Ignition ON & OFF then (2) Open & Close any Door. Upon seeing
these events, the system will Arm 20s after the last door is closed. The
doors will NOT be locked so you won't be locked out if you leave your keys
in the car, but the system will be Armed and will trigger if a door is opened.
Siren Output
9
When set to Continuous
(+)12v output to sound the included siren for 30s (Full Trigger).
When set to Pulsed
This can be used to create a unique siren sound with the included siren (if
you cut the Blue loop wire on the siren), or used when connecting to the
vehicle's horn by an optional relay.
V I S I O N 1 4 8 0 O W N E R ' S G U I D E
PROGRAMMABL E FEATURES
You cannot Arm if IG is ON in IG Protect Mode
(default), the system will trigger the siren
.)
RSCM
(default), the system will feed a continuous
, the system will feed a pulsed (+)12v (3A max.) output.
, the system will by-
12