7200-4Xg Module - D-Link DES-7200 Hardware Installation Manual

Product Model
MTBF
Operating
temperature
Storage
temperature
Operating humidity
Weight
Dimensions
1.6.6

7200-4XG Module

Figure 1 -13 shows t he basic app earance of t he 7200-4XG, t he l ine c ard m odule of t he
DES-7200 s eries. 7200-4XG provides four 10-Gigabit XFP i nterfaces an d f eatures t he
functions of layer-2/3 wire speed switching. The 7200-4XG is hot swappable.
Figure 1-13 Basic Appearance of the 7200-2XG
1. Interface
7200-4XG provides four 10-Gigabit XFP m odule i nterfaces and f eatures t he f unction of
layer-2/3 s witching with t he 10-Gigabit wire s peed. The XFP por ts s upport s hort-wave
(850nm, m ulti-mode), l ong-wave ( 1310nm, s ingle-mode) and
10-Gigabit XFP optical modules, thus facilitating configuration for users.
2. LEDs
The 7200-4XG provides various system LEDs, as described in the following table:
Table 1-12 LEDs on the Front Panel
Sign
Status
Link/ACT
3. Technical Specifications
1-20
7200-2XG
180,698hrs
0 to 40°C
-40 to 70°C
10% - 90% RH
Net weight: 2.8 Kg
436*346*45 ( L x W x Hmm)
Description Detailed Information
OFF: The module has not been powered on.
Red: Module fault
System LED
Flashing green: The module is initializing.
Solid green: T he m odule h as f inished i nitialization a nd c an
perform switching normally.
OFF: Port is not linked.
Port status LED Green: Port is linked.
Flashing green: Data is transmitted on the port.
DES-7200 Hardware Installation Guide
long-wave (1550nm)