Simple Connection Steps; Connecting The Ac Power Supply To The Power Module; Precautions - D-Link DES-7200 Hardware Installation Manual

Figure 3-16 Schematic Diagram for the Connection of the DC Power Cable
3.11.2

Precautions

Before c onnecting t he p ower s upply, you m ust v erify that the external p ower s upply

provided matches the power module installed of this equipment.
Before connecting the power cable, you must make sure that the switch of the power

module is at the OFF position.
The power cables of various colors must be connected to the appropriate wiring posts.

You must ensure that the power cables connected are in good contact.

3.11.3

Simple Connection Steps

1. Remove the protection cover of the DC wiring terminal.
2. Lock t he pow er c able t o t he appr opriate t erminal ac cording t o t he identification, and
tighten the pressing screw.
3. Put on the protection cover and tighten the screw.
4. Connect the other end of the power cable to the corresponding socket or connector.
3.12 Connecting the AC Power Supply
to the Power Module
Connect t he r elated AC power cable according t o t he I D on t he pane l of t he A C p ower
module and the location requirement, as shown in the following diagram.
3-14
DES-7200 Hardware Installation Guide