DES-7200 Hardware Installation Guide
3.7
Installing the Handle
For eas y handling of t he s ystem, t he DES-7210/7206 chassis i s pr ovided w ith a handle,
which can be installed by performing the following steps:
1.
Align the handle with the sunk hole on the fastening bar;
2.
Tighten the cross M4 sunk screws provided with the unit, as shown in Figure 3-10 and
Figure 3-11.
Figure 3-9 Installing the Handle of the DES-7210
Figure 3-10 Installing the Handle of the DES-7206
3-9