7200-2Xg Module - D-Link DES-7200 Hardware Installation Manual

DES-7200 Hardware Installation Guide
1.6.5

7200-2XG Module

Figure 1-12 shows the basic appearance of the 7200-2XG, which is the line card module of
the DES-7200 series. 7200-2XG provides t wo 10-Gigabit XFP interfaces and f eatures the
function of layer-2/3 wire speed switching. The 7200-2XG is hot swappable, while supporting
hot swappability of the XFP ports.
Figure 1-12 Basic Appearance of the 7200-2XG
1. Interface
7200-2XG provides t wo 10-Gigabit XFP m odule i nterfaces and f eatures t he f unction of
layer-2/3 s witching with t he 10-Gigabit wire s peed. The XFP por ts s upport s hort-wave
(850nm, m ulti-mode), l ong-wave ( 1310nm, s ingle-mode) and
10-Gigabit XFP optical modules, thus facilitating configuration for users.
2. LEDs
The 7200-2XG provides various system LEDs, as described in the following table:
Table 1-10 LEDs on the Front Panel
Sign
Status
Link/ACT
3. Technical Specifications
Table 1-11 Technical Specifications of the 7200-2XG
Product Model
Standard
Compliance
Port type
Transmission media
LED
Hot swappability
Power consumption
EMC
Safety regulation
Description Detailed Information
OFF: The module has not been powered on
Red: Module fault
System LED
Flashing green: The module is initializing
Solid green: T he m odule h as f inished i nitialization a nd c an
perform switching normally
OFF: Port is not linked
Port status LED Green: Port is linked
Flashing green: data transmission at the port
7200-2XG
IEEE 802.3-2002
IEEE 803.ab, IEEE 802.1D, and IEEE 802.1Q
802.1X authentication
Providing two 10-Gigabit XFP interfaces
10GBASE-SR(850nm) 62.5/125um MMF: 220m
1000BASE-LR(1310nm) 9/ 125 um S MF: 10KM ( 550m f or m ulti-mode
optical fibers)
10GBASE-LH(1550nm) 9/125 um S MF: 40KM
Status, Link/ACT
Supported
<75W
GB9254-1998 FCC Class A
GB4943-2001
long-wave (1550nm)
1-19