Installing The Air Filter Of The Des-7210; 3.10 Connecting The System Ground - D-Link DES-7200 Hardware Installation Manual

3.9 Installing the Air Filter of the
DES-7210
Simply push the air filter of the DES-7210 into the cabinet along the guide rail, as shown in
Figure 3-15.
Figure 3-14 Installing the Air Filter of the DES-7210
Note

3.10 Connecting the System Ground

A working ground GND is installed on the back of DES-7210/7206. In order to protect the
system, t he gr ound m ust b e well t reated. GND i s di rectly c onnected to t he ground bar or
ground pole of the equipment room.
3-12
You are recommended to install the air filter as the last step of the chassis
installation.
DES-7200 Hardware Installation Guide