Patient Reminder Screen - Respironics REMstar Auto M Series system User Manual

3. After you answer the first question, press the
continue answering each question. If you need to go back to a previous screen, press the
button.
4. There are 30 FOSQ questions. Once you have reached the last question, press the
to save your answers and exit the questionnaire.
4.6 p
atIEnt
Your home care provider may set a patient reminder that will appear periodically to alert you
to take certain actions, such as replacing your mask. A message will appear whenever the device
transitions from the Active Display to the Standby state if the period of time specified by your
provider has expired.
You can acknowledge the message by pressing any of the display buttons (+, –,
do not acknowledge the message within six minutes of it appearing on the screen, it will time
out and disappear. The message will continue to display for three consecutive days whenever the
device transitions from Active to Standby until it is acknowledged. If, after three days, you still
have not acknowledged the message, then the reminder period will reset and no more reminders
will display until the next time the patient reminder setting expires.
Figure 4–11 shows an example of a patient reminder message.
4-12
r s
EmIndEr CrEEn
Patient Reminder
Check your mask. A
new one may be available.
Call your provider.
f 4–11 p
IgurE
button to access the next FOSQ screen and
r s
atIEnt EmIndEr CrEEn
rEm
star
button
or ). If you
a m s u m
uto ErIEs sEr anual