Changing The Device Settings; Navigating The Display Screens - Respironics REMstar Auto M Series system User Manual

4.4 C
hangIng
You can view the set pressure on the Active Display screen, and you can view the following set-
tings on the Patient Data screens:
• Therapy usage hours
• Number of sessions greater than 4 hours
• 90% therapy pressure averages – only appears if in Auto-CPAP therapy
• System leak (if enabled by your home care provider)
• Apnea/Hypopnea Index (if enabled by your home care provider)
• Compliance check value
• Summary Data
Additionally, you can view and modify the following settings on the Patient Setup screens:
• C-Flex (if enabled by your home care provider)
• A-Flex (if enabled by your home care provider)
• Ramp starting pressure (if enabled by your home care provider)
• Mask alert (enable/disable)
• Auto off (enable/disable)
• FOSQ questionnaire
4.4.1 n
avIgatIng
Use the button to navigate to the next screen and the
screen. Use the
rEm a m s
star uto ErIEs
d
thE EvICE
d s
thE Isplay
+
and — buttons to adjust the settings on the Patient Setup screens.
u m
sEr anual
s
EttIngs
CrEEns
button to navigate to the previous
4-5