Respironics REMstar Auto M Series system User Manual page 26

With a-flex cpap (continuous positive airway pressure) device
Hide thumbs Also See for REMstar Auto M Series system:
Table of Contents

Advertisement

Note:
The FOSQ option will only appear on the Standby screen if a SmartCard is
inserted in the device or if a modem is connected.
3. Press the
Figure 4–3.
The Active Display screen shows the set pressure.
Some symbols indicating when certain conditions are turned on or detected will also appear
on the Active Display screen or on the Standby screen. These symbols are described below:
s
ymbol
Mask
Leak
Auto
Off
4. Put on your mask assembly when the air starts to flow.
5. Make sure that no air is leaking from your mask into your eyes. If it is, adjust the mask and
headgear until the air leak stops. See the instructions provided with your mask for more
information.
Note:
A small amount of mask leak is normal and acceptable. Correct large mask
leaks or eye irritation from an air leak as soon as possible.
6. If you are using the device while sleeping, try placing the tubing from the device over your
headboard. This may reduce tension on the mask.
Note:
If you are having trouble with your mask, refer to the instructions included with
the mask.
4-2
button to turn on the airflow. The Active Display screen appears, shown in
15.0
f
4–3 a
IgurE
CtIvE
Ramp – You can initiate the ramp feature by pressing the Ramp button. The
ramp symbol displays on the Active Display screen when the ramp function
is active.
Mask Leak Alert – This flashing text displays on the Active Display screen if the
Mask Alert setting is enabled and the device detects an excessive mask leak.
Auto-Off – This flashing text displays on the Standby screen if the Auto-Off
setting is enabled and the device detects a mask disconnect.
SmartCard – This symbol displays if a SmartCard is inserted in the device. If
the card is inserted incorrectly, the symbol will flash intermittently.
Modem – This symbol displays if a modem is connected to the device. (Note:
This symbol will vary in appearance depending on the type of modem be-
ing used.)
cmH 2 O
d
(
s
C
Isplay
WIth
mart
ard
d
EsCrIptIon
rEm
star
)
a
m s
u
m
uto
ErIEs
sEr
anual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Remstar auto m series

Table of Contents