Omron SYSDRIVE 3G3MV User Manual page 41

Design
D Selecting Sequence Input Method
·By using SW1, NPN or PNP input can be selected as shown below.
24 VDC
(+/--10%)
D Selecting RS-422/485 Termination Resistance
·Termination resistance can be selected by setting pin 1 of the SW2 to ON. The default
setting for the pin is OFF.
2-18
(Default setting)
S1 to 7
S1 to 7
Selects RS-422/485 termination resistance
Selects frequency reference input method
SW1
SW1
Chapter 2