Replacement Of Cooling Fan - Omron SYSDRIVE 3G3MV User Manual

Maintenance Operations
H Replacement of Cooling Fan
If the FAN fault is displayed or the cooling fan needs replacement, take the following
steps to replace it.
D Cooling Fan Models
3-phase 200-VAC 3-phase 200-VAC
Single-phase Single-phase
200-VAC 200-VAC
3-phase 400-VAC 3-phase 400-VAC
D Replacing Cooling Fan of 68-mm-wide Inverter Model
1. Press the left and right sides of the fan cover located on the lower part of the radiation
fin in the arrow 1 directions. Then lift the bottom of the Fan in the arrow 2 direction to
remove the Fan as shown in the following illustration.
2. Hold the fan wire and pull the protective tube of the cover in the arrow 3 direction.
3. Slide the protective tube and remove the internal connector.
Inverter
3G3MV-A2007
3G3MV-A2015
3G3MV-A2022
3G3MV-A2040
3G3MV-A2055/--A2075
3G3MV-AB015
3G3MV-AB022
3G3MV-AB040
3G3MV-A4015/-A4022
3G3MV-A4030/-A4040
3G3MV-A4055/-A4075
Radiation fin (Heat sink)
Wind direction
Protective tube
There is a connector inside.
Fan wind direction
Chapter 8
Cooling Fan
3G3IV-PFAN2007
3G3IV-PFAN2015M
3G3IV-PFAN2022
3G3IV-PFAN2037
3G3IV-PFAN2037 (2 parts)
3G3IV-PFAN2015M
3G3IV-PFAN2037
3G3IV-PFAN2037 (2 parts)
3G3IV-PFAN2015M
3G3IV-PFAN2037
3G3IV-PFAN2037 (2 parts)
8-31