Omron SYSDRIVE 3G3MV User Manual page 210

Communications
7-3-2 Data Write/Broadcast Data Write (Function Code: 10 Hex)
H Settings and Response
·To write data to the Inverter, such as control I/O and parameter set value data, issue the
following DSR message.
·Consecutive data of a maximum of 16 words (32 bytes for 16 registers) can be written
per DSR message.
·The register number is allocated to each function item, such as control I/O and param-
eter functions. The register number of each parameter is indicated wherever the
parameter is explained in this manual and in Section 10 List of Parameters. For regis-
ter numbers other than those of parameters, refer to 7-6 Register Number Allocations
in Details.
D DSR Message
Byte No.
1 Slave address
2 Function code (10 Hex)
3 Register No. of write start data Register No. of write start data
4
5 No. of registers of write data (max. 16) No. of registers of write data (max. 16)
6
7 Data of start register
Data of next register Data of next register
8
9
10 Data of next register Data of next register
11
12 Data of next register Data of next register
13
:
CRC-16 check CRC-16 check
n--1
n
7-16
Data
:
Chapter 7
MSB
LSB
MSB
LSB
MSB
LSB
: